Installation and use

Cable “Burn in”

In order to perform at their best, the PTFE cables need time to settle until they are ‘burnt in’. The process may take between 120 to 400 hours of playing music through your system (burn-in time depending cable model- Lunar recommended burn-in is 200-250Hrs, Equilateral 300-400Hrs, Green/ GreenLink 150-200Hrs); Leaving a CD player constantly on ‘Repeat’ mode is not recommended due to an excessive wear to the player, so please spear your CD player and if you feel you'll need more time in order to evaluate the interconnect for your full satisfaction, this shouldn't be a problem- please contact us.

Installation

The interconnects are made using the finest available materials, they are very durable but please note that any interconnect have its limitations regarding bending it. A Sharp bending may cause damage to the screening and also deteriorate the copper conductors to some degree by making a microscopic tears on the conductor surface. Although, the aerospace grade copper alloy used in the AR Sound interconnects will maintain its metal structure after many normal bending without any wear and baring severe abuse, the interconnects will not suffer any wear or depletion in sound quality over many years of usage- Unlike common used copper wires which tend to deteriorate to some degree after each bending.

When installed, the cable should be laying comfortably, the length of the cable should be appropriate- not too tight and tense and not too long either. Please avoid any stress on the plug in order to obtain best results.

Please note that the cables are directional: The band carrying the logo marks signal flow direction (for example The cable end near the logo goes to the NAC in the Lunar 5 pin DIN, While in the Lunar 4 pin DIN to XLR the end near the band goes to the Super-Cap / Hi-Cap).

The interconnects are intended for use under domestic conditions and should not be exposed to liquids of any kind or to an excessive humid conditions.

Please follow the installation instruction for the RCA plugs (only for the locking WBT type).

Shipping >>