The cable used to compose this special interconnect was carefully selected from many top quality cables being used in the aerospace industries.
The AR Sound Yellow use a low capacitance wire (115pF/meter). Low capacitance is an important factor in selecting a proper interconnect.
The Yellow cable contains two 22 AWG silvered copper alloy twisted pair wires with Teflon™
(PTFE) insulation and fully screened with. Actually a pure Copper conductors are not less good then silver conductors when they are new, The problem is that copper could not be used without oxidation over the years and plating the copper with silver done in order to slow down the deterioration of the copper wire. The silver content on the conductors ensures for better bonding to the silver solder used to make this superb interconnect.
The interconnect insulation is made of Teflon® (PTFE), PTFE is the best insulation material used in the cables industry which has the lowest dielectric absorption.
Using Teflon™ (PTFE) as insulation is a prime consideration in Hi-
The low dielectric absorption of Teflon allow locating the main conductors in the
Yellow cable in very tight configuration-
Teflon is also highly durable-
Usually Teflon wires tend to have relatively long "Burn in" period, so it takes about 96 hours for the cable to sound at it best.
The Yellow is a light weight interconnect. While many manufacturers tend to sleeve
their interconnects with a lot of rubber outside the conductors in order to keep
its look more impressive, this cable's outside diameter is only 4.7mm but the signal
conductors are 21AWG -
The PREH DIN connector contacts are made of silver plated brass and this ensures
a perfect metal bonding in the solder joint between the copper-
The PREH DIN connector is filled and overlapped (source side) with a special anti-
Directionality marking is added at the source side with the logo "AR Sound Yellow"
The first thing you will notice is details you have missed before. It's as though a curtain over the music has been removed.
The music details you will hear will flow effortlessly, in a natural manner, without
any emphasis on the upper-
The bass region is clean, very fast and solid, free from distortion or time smears.
Superb sounding Mid frequencies -
High frequencies are crystal clear and natural -
The sound stage is wide and clear, with superb focus.
75/100/120 Centimetres of Shielded twisted pair, 19/34AWG silvered copper alloy primary conductors
(total of 0.75 mm (1/32") diameter pair conductors (21-
primary conductors Insulation: 1/16" PTFE.
Shield: silver plated OFC copper (minimum coverage 94%).
Resistance: 52 milliohms/meter (15.8 milliohms/feet).
Capacitance: 125 pF/meter max (Hot to screen). 90 pF/meter max (between conductors)
Outside Diameter (nominal): 4.7 mm
External Jacket: Polyurethane impregnated Fibreglass external sleeve over FEP jacket.
External colour: Yellow.
AR Sound Yellow 1 interconnect include an anti-
This special high visco-
What is microphonicity?: Music played in the room vibrate the air and the interconnect, the vibrating cable transforms this energy into an electric signal that interferes with and distorts the original music signal travelling from the music source to the amplifier. Lowering the distortion caused by a vibrating interconnect is overlooked by most manufacturers.
The result is better focus and resolution, with a more solid bass line and dynamic presentation.
AR Sound Yellow 1
The Yellow 1 delivers remarkable sound quality with equipment that carries DIN sockets.
The Yellow 1 connecting CD players or other sources to Pre-
DIN to DIN (5 pin 180 degree), 75/100/120 Cm length is offered-
For ordering in USD or Euro select currency: